Home News Stand How to Repair Panasonic Microwave?

How to Repair Panasonic Microwave?

If you’re someone who relies heavily on your microwave for daily cooking, then this blog is for you. The speed and efficiency with which a microwave can help you cook are unparalleled. That’s why knowing how to fix Panasonic microwaves can benefit you.

While we implore you to take help from professionals such as https://fixappliances.ca/panasonic-appliance-repair/ for more severe issues, we’ve concocted a list of simple problems you can solve. So without wasting any more time, let’s get right ahead and start with the list of Panasonic microwave issues you can fix on your own.

How to Fix Panasonic Microwave?

Before you learn about how to fix a Panasonic microwave, you must learn the different reasons why it may not work in the first place. Hence, we’ve concocted a step-by-step guide to help you understand the issues and how to repair Panasonic microwave.

Microwave Not Spinning

Spinning ensures that your food inside the oven is being heated evenly. However, if your microwave stops spinning, it’ll affect the process. Additionally, it can cause food to get burnt in one spot and be ice-cold in another.

Learning how to repair a Panasonic microwave oven is easy. First, you need to remove the glass plate inside. Then, clean the microwave thoroughly. Often the reason your microwave is not spinning is debris. Debris obstructs the turntable components of the spinner, causing it to ham up.

Alternatively, observe the tray coupler. It may be damaged, causing the spinner to jam up. Finally, if the problem isn’t resolved, there’s a high chance your spinner motor is damaged.

When a spinner motor gets damaged, we recommend calling a trained professional. Motors are complex systems, and they require professional attention to be fixed.

Microwave Jamming Up

A prevalent problem that may occur is the microwave door jamming up. If the door jams up, using the microwave becomes impossible. Thus, to know how to repair Panasonic microwave door jamming, read on.

If a door does not open, you must first examine the door hook. Following this, examine the latch and the springs as well. Finally, we recommend looking closely at the lever and the door open button. We recommend checking the actuator if you fail to notice any issue with these components.

The door hook in a microwave is generally made of plastic, causing the door to jam up. Plastic can be a difficult substance for sustainable use. Additionally, this also applies to the plastic actuator. Due to consistent wear and tear, plastic is prone to bending easily. Once you find the issue, you can either repair or replace the said part.

Buttons Malfunctioning

It’s an absolute mood kill when you’re ready to watch a movie, but your microwave suddenly decides to act up. You keep pressing the buttons, but your popcorn doesn’t seem to be getting prepared inside. What happened here? Your Panasonic microwave door may have jammed up.

The touchpad may be faulty. To fix this issue, the touchpad’s main control board must be replaced. However, fixing this issue is not our cup of tea. Hence, we strongly recommend you reach out to a professional service that knows how to repair Panasonic microwave. We recommend this because microwaves are relatively stronger, high-voltage appliances. An irregular discharge from your microwave can short your entire house’s circuit, or even worse, it can start a fire. Thus, hiring a licensed professional would be in your best interests.

Dial Not Working

The dial is also a part of your control panel. Thus, this needs to be dealt with care and precision. Often, the dial doesn’t work because of a calibration error.

To fix this, we suggest you unplug your microwave oven and replug it 45 seconds later. Press the reset/stop button once and open the door. Keep pressing the start button until the buzzer stops beeping. Then press the reset/stop button thrice until the oven shows the total usage time of the magnetron.

Panasonic Microwave Display Error

Knowing how to fix Panasonic microwave oven displays can be essential to your daily life. A bad display can cause a world of problems.

The display often stops working due to a faulty control board in your machine. As a result, the issue could be a simple solder gone bad or even a bad capacitor. However, the main controller may also have malfunctioned.

Thus, we recommend seeking professional help for this. Calling a professional fixer ensures that the control board or components that have gone bad are fixed right on time. Additionally, it is safer since they know well what they are doing. They can safely remove the controller and replace it with a new one. It prevents chances of fuse shorting, electrical discharge anomalies, etc.

Fixing Panasonic Microwave is Easy Now!

Thus, we have discussed the major issues with microwaves and how to fix Panasonic microwaves. Knowing how to fix your microwave is essential. It’s one appliance that we all need at all times of the day.

Apart from the issues we discussed in detail, you may face a few more, such as:

  • Beeping Lights. In such a case, call a professional since the issue is related to the limit switch;
  • Repeated Shutdown. The main control board may be experiencing the fallout of severe wear and tear, so calling a professional is advised;
  • Fuse Blowing Up. This requires professional attention as something is wrong with the circuitry of your machine.

Before paying attention to repairs, we recommend you thoroughly check your microwave’s problems. Knowing the problem is 50% of fixing the Panasonic microwave. Thus, we wish you all the best in determining the issue and fixing it.

If you cannot, seek professional help immediately from the best fixer in Canada, like https://fixappliances.ca/. They have years of professional expertise and know how to fix a Panasonic microwave! They will safely and securely resolve the issue at hand at an affordable price. Avoid wasting time with a broken microwave and seek professional help right away.

Exit mobile version